×

angle point meaning in Chinese

角点

Examples

  1. Punch former is applicable on surface grinder or universal grinder for grinding round , radius and multi - angle points of punches and for precisely edm electrode
    它可用于平面磨床及万能工具磨床,可对各种形状的冲头进行精度磨削。并可用于电火花机床电极的精密加工。
  2. Punch former is applicable on surface grinder or universal grinder for grinding round , radius and multi - angle points of punches and for precisely edm electrode . with is radius dresser arm , it is able to dress wheels to different straight , arc profiles
    凹弧r100mm外型尺寸: 360 116 145mm它可用于平面磨床及万能工具磨床,对各种形状的冲头进行精度磨削,并可用于电火花机床电极的精密加工。
  3. Some profound concernings scatter in various magazines , and the result of research has no character of system or comprehensive because it was based on the special ways and particular angle pointed by researchers . so the research had less approach in the depth of tour planning for reservoir
    另外,有关旅游开发的研究多从作者自我指定的某一特定角度出发,研究内容及成果毫无系统性或全面性而言,因此有关水库旅游开发的理论研究深度受到严重限制。
  4. Due to the existence of the eddy and the abrupt bend of the stream line , the pressure on the four faces has the distribution as follow : the lowest pressure appears at several centimeters after the angle point along the top boundary , the highest pressure appears near the center line of the vertical shaft on the bottom boundary , near the angle point , the pressure on the inner boundary decreases with the decreasing height , the pressure on the external boundary decreases slightly in the right - angle region , and increases obviously near the corner
    回流漩涡的存在,以及直弯处流线的急剧弯曲,导致壁面压力分布在上表面距弯点一定距离后出现压力最小值,下表面上,在竖井中心线略偏下游的位置出现压力最大值,竖井内表面接近弯点处出现压力沿程降低的现象,竖井外表面压力在进入直弯后先是沿程略有降低,在直弯角落处又明显升高。

Related Words

  1. angle plug
  2. angle ply laminate
  3. angle pole
  4. angle porcelain tube
PC Version

Copyright © 2018 WordTech Co.